AUTONET TV

Slipping into Fall (Driving with ABS Brakes)

As the weather changes over from hot to colder, drivers will have to deal with more slippery streets.  And it's important to know how to drive with the brakes you have on your vehicle. 

In the 1970s, anti-lock braking systems (ABS) started to be installed on vehicles and they've been a game changer for drivers.  Most modern vehicles have ABS and it's important to know how to drive with them.

In older vehicles without ABS, the driver applies the brakes by pushing down the pedal.  That, in turn, sends braking pressure to all four wheels at once.  But all four tires don't have the same traction because the road surface they're each on isn't exactly the same.

ABS allows sensors to determine when particular wheels are slowing down more quickly.  The ABS then reduces braking pressure to the wheels that are about to lock up.  That way the wheel turns and the tires keep some grip. (You have to have grip to stop.) It's kind of what drivers try to achieve when they pump the older-style brakes without ABS.

Another engineered feature of ABS is that it makes sure your front wheels will continue to rotate and maintain some traction.  That's important because the front wheels are used to steer, and being able to steer gives a driver more control in a quickly-changing situation.  So ABS is all about stopping as fast as the road surface will allow but at the same time enabling the driver to maintain control. 

ABS is designed for the driver to put steady pressure on the brake pedal and let the vehicle’s computerized system handle the braking.  Pumping the pedal in a vehicle with ABS can defeat what the system is trying to do to help you maintain control.

Because stopping techniques in a vehicle with ABS are different than those without, it’s important to know which brakes you have so you can operate them accordingly. 

If you have any doubt, consult your service advisor.  ABS involves sophisticated technology and must be maintained in order for it to work properly.  Your service advisor can recommend a maintenance schedule for you to follow so your ABS is always on the ready to help you stop when you need to.

American Brake Centers Inc.
3435 Bashford Ave Ct.
Louisville, KY 40218
502-459-0355
http://www.americanbrakecenters.biz

For Brakes' Sake (Brake Rotor Service in Louisville)

Think of how much abuse your brakes take. Day in and day out, they stop your vehicle when it's going fast and when it's going slow. Maybe your vehicle has been vibrating when you brake, or maybe it seems like your stopping distance is a little bit longer than it used to be.

Then it's time to get your brakes checked out. After all, you have to be able to stop if you want to be safe. Nearly all newer vehicles have disc brakes on the front, and many have that type of brake on all four wheels. That makes it likely you'll be getting disc brakes fixed at some time in your vehicle's lifetime.

Knowing how disc brakes work is as easy as riding a bicycle. If your bike had hand brakes, you'll probably remember a mechanism that squeezed a couple of pads on each side of your bicycle wheel when you applied the brakes. Disc brakes are similar; but instead of the bike wheel, there's a metal disc instead. If that disc is warped or has irregularities in it, it's going to vibrate.

It used to be that rotors were thick, and when they warped, a technician could "turn" them to scrape off a layer of metal so their sides were straight again. The latest vehicles are using thinner, lighter rotors with a slightly different construction. Now, it's likely that rotors that are resurfaced this way will not have enough metal left to work safely. In fact, some manufacturers advise only replacing rotors that are worn out.

Newer designs have reduced rotor prices, and in many cases, the labor cost of turning the rotors is higher than buying new. There are times, though, where your rotors can be resurfaced and still meet manufacturer specifications.

If you have a rotor replaced on one side of your vehicle, it might be a good idea to replace rotors on the other side, too.

Maybe you're looking for the new rotors to last longer than the ones that were on there. New technologies can offer a longer lifespan in a premium rotor. Armed with knowing the type of driving you do, you and your American Brake Centers Inc. service advisor can make the best decision on which direction you want to go with your new brakes.

American Brake Centers Inc.
3435 Bashford Ave Ct.
Louisville, KY 40218
502-459-0355
http://www.americanbrakecenters.biz

The Edible Engine

You may have had a friend whose vehicle was the victim of hungry rodents.  After all, mice, rats and squirrels—even rabbits—have been known to gnaw on wires in engine compartments, causing vehicle electrical systems to go haywire.  They can disable a vehicle completely and be very expensive to fix.

In 2017, some drivers noticed their vehicle's wiring was being chewed and found out the automaker was using a relatively new material for covering their wires: soy.  Many of the repairs to their new vehicles weren't covered under warranty by the manufacturer when it was discovered rodents were eating the wiring.  So the owners filed a class action suit, saying the soy covering was essentially baiting the critters. 

The automakers tell a different story, saying mice, rats and squirrels have been chewing through wire insulation long before it was made out of soy. 

Regardless of what the insulation is made of, vehicle owners should make sure rodents aren't chowing down and creating a problem in the engine compartment.  They can have their repair facility check for these signs:  Little bits of acorns, leaves, chewed up plastic and animal droppings in the engine's nooks and crannies.  Using a black light, your technician can detect animal urine, a sure sign that they've been using your engine compartment as a warm apartment, a nest and a dining room. 

You can take steps to prevent rodents from chomping your vehicle's parts.  Honda—one of the vehicle manufacturers that uses soy-based wiring covering—makes a rodent tape.  It contains a spice called capsaicin that rodents find too hot to handle.  Other preventative measures include installing metal mesh around wiring harnesses or spraying the engine compartment with special rodent-repellants. 

Rodent damage can cost one vehicle owner thousands of dollars to fix, not the kind of bite anyone wants taken out of their bank account.